Er hægt að prenta tvöfalt-laga gler með mynstri?

More and more people like to use double-layer glass, because it is not only very beautiful and transparent, but also very convenient to use, and also think that the double-layer structure is stronger, anti-drop, and heat-insulating. And some people will also customize their favorite styles, plus their favorite patterns, it is difficult to put down. At this time, many people will ask, can the design be printed on the glass? I can tell you it's okay.

Það eru margar leiðir til að prenta mynstur á tvöfalt glergler: leysikóðun, límingu, hitauppstreymi osfrv. Hins vegar, hvort sem er, þegar þú notar mynstrað gler, skaltu hafa í huga:

1. For the cleaning of cups, double-layer glasses should be cleaned at least once a day. When cleaning the cup, it is not only necessary to clean the mouth, bottom and walls of the cup, especially the bottom of the cup. If you don't clean your cups often, you can deposit and accumulate a lot of bacteria and dirt. If cleaning takes up a lot of dust, you can squeeze toothpaste on the brush and brush back and forth in the cup.

2. Do not use too much warm water. The patterns on the cups are all printed using printing technology. So if the cup is diathermic, you can't use too much water. However, after a while, the custom patterns don't look as good as they used to be.

3. Forðastu útsetningu fyrir sólarljósi. Ef þú vilt að sérsniðna tvöfalda krukkarinn þinn haldist eins björt og nýr í langan tíma skaltu halda honum frá sólinni. Vegna þess að sterk sólargeislun getur mislitað bikarinn.

Therefore, when a customized double-layer glass with an exclusive pattern is available, be sure to pay attention to future use to avoid certain damage to the printed pattern. At the same time, the patterns of each printing method are different, and the printing quality is also different. Therefore, if you want to keep the pattern for a long time, you must indicate your needs to the manufacturer, so that the manufacturer can make the glass more in line with the user's requirements.